Panier
Il n'y a aucun article dans votre panier
18 (9) cm EDC "Damascus Steel" with leather sheath
An 18 cm EDC (9 cm blade length) with a blade made of damascus steel, a handle made of mammoth ivory and a leather sheath. Lire plus..
0
This knife is designed as an EDC (Every Day Carry) knife for your pocket. It's small and discreet enough to be carried every day. Therefore, the leather sheath deliberately lacks a belt buckle. It can be easily stowed or carried in a pocket, backpack, or handbag. Due to its short blade length, it is not subject to the carrying ban in Germany.
The edge of this knife is made of 450-layer high-performance Damascus steel made of 1.2562, ApexUltra, and 1.2767 ESU with a hardness of 66 HRC. The Damascus steel was forged under oxygen-free conditions to eliminate inclusions or cavities between the layers.
The blank was also forged with optimal temperature control and forming, and then subjected to extensive heat treatment (including deep freezing after hardening). This guarantees an optimally adjusted microstructure and finely distributed carbides.
The handle is made of the highest quality mammoth ivory (not stabilized, natural bark, no soft or porous areas), the bronze pins are riveted and have a hammered finish. The scales and the tang of the blade are chamfered to prevent sharp edges when the handle material is worn. The handle has a hidden lanyard hole.
| Lenght of edge: |
88mm |
| Max. height of the blade: |
24,6mm |
|
Thickness of the blade: |
|
| Ricasso: |
2,4mm |
| Middle: |
2,3mm |
| 10mm before the tip: |
1,3mm |
| Lenght of the handle: |
90mm |
| Weight: |
Knife: 72g with leather sheath: 100g |
| Steel: |
Damascus steel made of: 1.2767 ESU |
| Material of the handle: |
mammoth ivory, bronze |
| Material of the sheath: |
bare leather, colored and sealed |
| Shape of the handle: | western |