Panier
Il n'y a aucun article dans votre panier
20 cm Userfriendly "ApexUltra"
A 20 cm Userfriendly with an ApexUltra blade and a desert ironwood handle Lire plus..
0
The geometry of this simple and elegant gyuto corresponds to a very performant userfriendly. It is equally suitable for all cutting techniques.
The new high-performance knife steel ApexUltra was used for the cutting edge. Despite a high working hardness of 66 hrc, it has very good cutting edge stability. It keeps a high level of sharpness for a very long time and can still be easily resharpened.
Of course, the blank was forged with optimal temperature control and forming and then subjected to extensive heat treatment (including deep-freeze treatment after hardening). This guarantees an optimally adjusted structure and extremely finely distributed carbides.
| Lenght of edge: |
198mm |
| Max. height of the blade: |
53mm |
|
Thickness of the blade: |
|
| Tang: |
4,4mm |
| Coil: |
4,1mm |
| Middle: |
2,6mm |
| 20mm before the tip: |
1,1mm |
| Lenght of the handle: |
125mm |
| Weight: |
200g |
| Balancepoint: |
10mm before the handle |
| Geometry: |
Userfriendly |
| Flatspot: |
No Flatspot |
| Core steel: |
C = 1,25 %
P <= 0,01 %
S <= 0,01 %
Si = 0,35 %
Mn = 0,30 %
Cr = 1,50 %
W = 2,60 %
V= 0,4%
66hrc
|
| Material of the handle: |
Desert ironwood, reindeer antler, black fiber |
| Shape of the handle: | Western |