Panier
Il n'y a aucun article dans votre panier
22cm Workhorse "ApexUltra"
A powerful 22cm workhorse with an ApexUltra blade and desert ironwood handle. Lire plus..
0
This powerful workhorse has a massive and heavy ApexUltra blade with a hardness of 66hrc. Nevertheless, it has a very good cutting ability, the tip is not ground too fine. The blade has a moderate taper and has a convex ground. The knife is suitable for all cutting techniques.
A real worker!
The handle is made of desert ironwood with a fantastic grain with a dark grenadilla spacer.
| Lenght of edge: |
225mm |
| Max. height of the blade: |
57mm |
|
Thickness of the blade: |
|
| Tang: |
5,0mm |
| Coil: |
4,7mm |
| Middle: |
3,2mm |
| 20mm before the tip: |
1,3mm |
| Lenght of the handle: |
130mm |
| Weight: |
270g |
| Balancepoint: |
32mm before the handle |
| Geometry: |
Workhorse |
| Flatspot: |
no flatspot |
| Core steel: |
C = 1,25 %
P <= 0,01 %
S <= 0,01 %
Si = 0,35 %
Mn = 0,30 %
Cr = 1,50 %
W = 2,60 %
V= 0,4%
66hrc
|
| Material of the handle: |
Desert Ironwood, Grenadilla |
| Shape of the handle: | Rokkaku-Hanmaru (upside angular,underside oval) |