€0,00
Ajouter au panier

27er Workhorse 1.2063

27er Workhorse 1.2063
27er Workhorse 1.2063
27er Workhorse 1.2063
27er Workhorse 1.2063
27er Workhorse 1.2063
27er Workhorse 1.2063
27er Workhorse 1.2063
27er Workhorse 1.2063
€0,00
* Taxes incluses Sans les Frais d'expédition

Ein 27er Workhorse mit einer Klinge aus 1.2063 und einemGriff aus Buckeye Burl. Lire plus..

0

The blade of this knife is made of 1.2063. With its 65hrc working hardness and the high content of chromium carbides, the steel has a very good resistance to abrasive wear. In particular, the high hardness and wear resistance combined with good toughness (for a steel of this hardness) characterize this steel. The wear resistance is slightly below that of 1.2562, but the 1.2063 offers higher cutting edge stability and is easier to bring to a very high sharpness.

This knife has a complex workhorse geometry. The blade has a strong taper, which gives you a strong wedge effect on the choil, while the blade becomes slimmer and more slender towards the front. The blade has a "Walkschliff", the convexity of the blade decreases significantly towards the tip. The large blade has a high dead weight and therefore clearly supports the cut.

The blank of this blade was forged from a 60 mm thick material with a forging start temperature of 900 degrees within a heat to about 12 mm. The subsequent form forging then took place at a maximum of 790 degrees. After each heat, the blank was cooled to below 720 degrees. This process creates a very fine-grained matrix as well as very small and finely divided carbides.

Schneidenlänge/lenght of edge:

275mm

Max. Klingenhöhe/max. height of the blade:

55mm

Klingenstärke am Rücken/thickness of the blade:

 
Angel/tang:

6,8mm

Kehl/choil:

5,9mm

Mitte/middle:

3,3mm

20mm vor der Spitze/20mm before the tip:

1,1mm

Grifflänge/lenght of the handle:

116mm

Gewicht/weight:

312g

Schwerpunkt/balancepoint:

48mm vor dem Griff/before the handle

Geometrie/geometry:

Workhorse

Klingenstahl/blade steel:

1.2063, C=1,45%, Cr= 1,5%, Mn=0,6, 65hrc

Griffmaterial/material of the handle:

Stabilisiertes Buckeye Burl, schwarzes Fiber, Bronze, Neusilber/stabilized buckeye burl, black fiber, bronze, german silver

Griffform/ shape of the handle: Westlich/western
Veuillez accepter les cookies afin de rendre ce site plus fonctionnel. D'accord? Oui Non En savoir plus sur les témoins (cookies) »