€73,35
Ajouter au panier

Historical iron from 1735

Historical iron from 1735
Historical iron from 1735
Historical iron from 1735
Historical iron from 1735
Historical iron from 1735
Historical iron from 1735
Historical iron from 1735
Historical iron from 1735
Historical iron from 1735
€73,35
* Taxes incluses Sans les Frais d'expédition
Numéro de l'article:
4-1-1-1
Heure de livraison:
1-2 business days

Historical iron from 1735 Lire plus..

1-2 business days

This iron comes from wall anchors from the Oberndorf church (Cuxhaven district) from the year 1735. A few years ago the church was extensively renovated and several wall anchors from two construction phases of the church were found (1735 and 1653). The wall anchors were officially purchased by the friends' association of the Oberndorf church. 

About the material: 

In the first half of the 18th century, iron was produced in Germany in charcoal blast furnaces. The pig iron (cast iron) obtained in this way had a high carbon content of over 2.06% and could not be forged. Following the smelting, the pig iron was therefore melted and decarburized (refined) in a so-called refining furnace. The result was sponge iron contaminated with slag and charcoal residues (the so-called bloom) with a low carbon content. This bloom was forged under drop hammers and homogenized and cleaned (refined) by repeated folding. 

The iron offered here represents the equivalent of today's mild steel. Since the mechanical requirements for this material were not very high, it was not very finely refined, which resulted in a highly inhomogeneous and layered structure that can be emphasized by grinding and etching . This makes it particularly interesting for use in decorative elements of all kinds. I use this material, for example, for applications on knife handles or for the side layers of 3-layer blades. 

Attention: 

Every piece of iron is different. Some pieces have a very strongly inhomogeneous structure and larger cavities and inclusions. Some pieces are more homogeneous and have finer inclusions. This iron can have larger inclusions, cavities and cracks. These are material-typical properties that do not constitute a reason for an exchange.

Veuillez accepter les cookies afin de rendre ce site plus fonctionnel. D'accord? Oui Non En savoir plus sur les témoins (cookies) »