Cart
You have no items in your shopping cart
24 cm Gyuto "Damascus Steel"
A 24 cm Gyuto with a blade made of damascus steel and a handle and saya made of buckeye burl. Read more..
0
The blade of this knife is made of 450-layer high-performance Damascus steel made of 1.2562, ApexUltra, and 1.2767 ESU steels with a hardness of 66 HRC. The Damascus steel was forged under oxygen-freeze conditions, eliminating any inclusions or cavities between the layers.
The blank was also forged with optimal temperature control and forming, and then subjected to extensive heat treatment (including deep-freeze treatment after hardening). This guarantees an optimally adjusted microstructure and finely distributed carbides.
Towards the coil, the knife resembles a slightly more robust Userfriendly blade, while towards the tip, it lies between a Userfriendly blade and a Laser blade. Overall, the knife is a very good performer.
The knife is suitable for all cutting techniques.
The handle is made of stabilized Buckeye Burl with a Grenadilla spacer and a bronze pin and end plate.
The saya is made of buckeye burl with a backing of grenadilla a middle section of padouk and a pin made of bronze.
| Lenght of edge: |
238mm |
| Max. height of the blade: |
57mm |
|
Thickness of the blade: |
|
| Tang: |
4,6mm |
| Choil: |
4,3mm |
| Middle: |
2,4mm |
| 20mm before the tip: |
0,9mm |
| Lenght of the handle: |
108mm |
| Weight: |
Knife: 207g with Saya: 375g |
| Balancepoint: |
40mm before the handle |
| Geometry: |
Userfriendly |
| Flatspot: |
Approx. 80mm |
| Steel: |
Damascus steel made of the following steels: 1.2767 ESU |
| Material of the handle: |
Stabilized buckeye burl, grenadilla, bronze |
| Material of the Saya: |
Stabilized buckeye burl, grenadilla, padouk, bronze |
| Shape of the handle: |
Western |