Panier
Il n'y a aucun article dans votre panier
22,2 cm Gyuto "14C28N"
A 22.2 cm Gyuto with a cutting edge made of 14C28N, side layers made of V2a, pure nickel and 1.4034 and a handle made of desert ironwood. Lire plus..
0
This knife is a performant user-friendly with a consistent taper and a medium-fine tip.
The cutting edge is made of 14C28N stainless steel with a hardness of 62 HRC, while the side layers are made of 1.4034 stainless steel. The intermediate layer consists of three layers of pure nickel and two layers of V2A stainless steel.
This knife is suitable for all cutting techniques.
The Japanese handle is made of desert ironwood with a reindeer antler spacer and black fiber.
Of course, the blank was forged with optimal temperature control and forming, and then subjected to extensive heat treatment (including deep freezing after hardening). This guarantees an optimally adjusted microstructure and finely distributed carbides.
| Lenght of edge: |
222mm |
| Max. height of the blade: |
59mm |
|
Thickness of the blade: |
|
|
Tang: |
3,4mm |
| Coil: |
3,2mm |
| Middle: |
2,0mm |
| 20mm before the tip: |
1,0mm |
| Lenght of the handle: |
133mm |
| Weight: |
215g |
| Balancepoint: |
approx. 25 mm before the handle |
| Geometry: |
Userfriendly |
| Flatspot: |
70mm |
| Core steel: |
62 hrc |
| Intermediate layer: |
nickel, V2a |
| Clad: |
1.4034 |
| Material of the handle: |
Desert ironwood, reindeer antlers, black fiber |
| Shape of the handle: | Hakakku (octagonal) |